Руководство по исследованиям и разработкам - История изменений

Papa Leroy: /* Улучшения */

2021-06-29T03:40:10Z

Улучшения

Внесённые изменения

XtenZzo: ДОперевод руководства

2021-01-10T20:10:10Z

ДОперевод руководства

Внесённые изменения

Honker: /* Разбор File:Decon.png */ Исправление ссылки

2020-11-21T12:56:17Z

Разбор File:Decon.png: Исправление ссылки

Papa Leroy в 09:30, 9 ноября 2020

2020-11-09T09:30:56Z

Внесённые изменения

Papa Leroy: Papa Leroy переименовал страницу Guide to Research and Development в Руководство по исследованиям и разработкам

2020-10-25T06:16:10Z

Papa Leroy переименовал страницу Guide to Research and Development в Руководство по исследованиям и разработкам

Papa Leroy: Почалось с переводом

2020-10-17T06:26:17Z

Почалось с переводом

Внесённые изменения

BOT Purple: Новая страница: «= Research and Development = File:Cute Drone doing Research.png The main purpose of Research and Development (short R&D or RnD) is to provide upgrades to the...»

2020-07-10T10:55:51Z

Новая страница: «= Research and Development = File:Cute Drone doing Research.png The main purpose of Research and Development (short R&D or RnD) is to provide upgrades to the...»

Новая страница

= Research and Development =
[[File:Cute Drone doing Research.png]]

The main purpose of Research and Development (short R&D or RnD) is to provide upgrades to the various machines around the station, to contribute to the various station objectives, to equip the crew with better equipment and to offer robotics more possibilities through higher research levels. 
To perform the R&D role, you will need to construct and deconstruct various items, in order, to get Research Levels, which in turn grants access to more complex and powerful items. 
Do note that some items require Toxins research, performed in the toxin test area (see [[Guide to Toxins]]), Illegal Technologies Research, acquired by deconstructing [[Syndicate Items]] and Alien Research, obtained by deconstructing [[Abductor|Abductor Gear]]. 

To use any of the machinery in R&D, you will need to use the R&D console, which's interface looks like this:

[[File:R&D Console Interface.png]]

It contains the:
* [[Guide_to_Research_and_Development#Technology Disks|Disk Operations]]
* [[Guide_to_Research_and_Development#Deconstruction|Destructive Analyzer Menu]]
* [[Guide_to_Research_and_Development#Protolathe|Protolathe Menu]]
* [[Guide_to_Research_and_Development#Circuit Imprinter|Cicuit Imprinter Menu]]
* [[Guide_to_Research_and_Development#Server Saving|Settings]]
* Research Branches with their current Research Level

= [[Destructive Analyzer|Deconstruction]] [[File:Decon.png]] =

The Destructive Analyzer deconstructs items to increase the Research Levels of the Console and therefore allows to unlock further technologies for the [[Protolathe]] and [[Circuit Imprinter]]. 
The deconstruction process is as follows: 
* Place the item to be deconstructed into the Analyzer 
* Use the R&D console and go under the tab 'Deconstructive Analyzer Menu' 
* Use the 'Deconstruct Item' button, to deconstruct the item or the 'Eject Item' button, to eject the item

[[File:Deconstructive_Analyzer_Interface_2.png]]

There is also information given about the current item in the Deconstructive Analyzer:
* A: Research Branch
* B: Research Levels of the item
* C: Research Levels of the Database

If the item is then deconstructed the Research Levels of the Database can be increased by 1:
* If B is larger than C.
* If B and C are equal.
The latter is the suggested method as items with higher Research Levels can be deconstructed later on to achieve higher tech levels.

There are also exceptions to this, like some tech notes from the [[Sol Traders]].

Basic research (Tech Levels up to 5) can be fully achieved by just deconstructing items from the [[Protolathe]] and [[Circuit Imprinter]], 
while advanced research (Tech Levels from 5 upwards) will most of the time require items from other departments (including [[Xenobiology]] and [[Robotics]]).

The [[RnD breakdown list|'''R&D List''']] allows for the completion of basic and advanced research, do note however that this list is not necessarily the most efficient and experimentation and additional investigation is recommended. 
The R&D List is what is often referred to when talking about performing R&D, instead of handing out items and upgrading machinery. 
Here is a [https://kyep.github.io/paratools/rndtool/RDT.html helpful tool] for simulating items you can deconstruct, should you wish to experiment. The 'filter' button will filter for items that will only improve the selected tech level.

= [[Protolathe]] [[File:Protolathe.png]] =

The Protolathe allows for the creation of a variety of items, ranging from bluespace constructions, medical tools and implants, stock parts for all kinds of machinery, over to weaponry. (See [[Protolathe]] for a full list) 
However, it only starts with the most basic items available, akin to an [[Autolathe]], which can be deconstructed to unlock better technologies. 
The stronger/advanced/better the items, the more materials and a larger variety of them are required (resulting in R&D being dependent on mining), alongside higher Research Levels. 

[[File:Protolathe_Interface.png]]

* A: Material/Chemical Storage (allows for the ejection of materials/chemicals in different quantities) 

[[File:Material_Storage_Interface.png|400px]]

* B: Search Bar (for tracking specific items)
* C: Different Categories (for producing multiple similar items, e.g. stock parts or implants) 

If you found the item you were searching for it can look like this:

[[File: Protolathe_Printing_Interface.png]]

* A: Name of the Item
* B: Materials required
* C: Missing Materials

Items can also be printed once, five times or ten times.

= [[Circuit Imprinter]] [[File:Circuitprinter.png]] =

The Circuit Imprinter allows for the creation of boards for different consoles and machinery. (See [[Circuit Imprinter]] for a full list) 
Functions pretty much like the Protolathe, except that it only requires glass and a handful of times metal, gold, or diamonds for its boards.

= Server Saving [[File:Rndserver.png]] =

Server Saving is an integral part of R&D, as it will update the server on the station, creating a back-up of the Database. 
Syncing will save the best Research Levels of both the server and R&D console on both devices, meaning it can also be used to redownload the back-up on the server in case the R&D console got destroyed. 
This back-up can also be used by Robotics and is essential for Robotics to operate successfully, as it will grand them better technologies for their exosuit fabricators. 
Furthermore, the [[Research Director]] can access the R&D server management computer and either transfer or delete research blueprints to other computers on the station. 

To sync just head into the settings of the R&D console.

[[File:R&D_Console_Settings.png]]

From there everything is pretty self-explanatory, with Device Linkage Menu allowing for the disconnecting and reconnecting from the nearby devices. (Destructive Analyzer etc.)

= [[Guide_to_Advanced_Construction|Upgrading]] =

Upgrading is the process of improving machinery by replacing their components with their better counterparts, e.g. a matter bin being replaced with an advanced matter bin. 
In addition to stock parts, like matter bins, the term component includes beakers, wires, materials and igniters, of which the latter three have no better counterparts. 
The process of upgrading a machine improves the machinery's capabilities, along with enabling it in some cases to serve new functions. (See [[Guide_to_Advanced_Construction|Advanced Constructions]] for more details) 
There are three methods available to upgrade machines, ordered from worst to best:
 

Reconstructing the machine [[File: Circuit_Frame.png]]
* Screw the panel of the machine open
* Use the crowbar to remove all the components along with the circuit board
* Reinsert the circuit board into the machine frame
* Insert the new components
* Screw the panel back in place

While this method consumes out of all methods the highest amount of time to perform, all components, that are not stock parts, can only be replaced via this method. 
However, it also resets the machine and ejects all the materials stored within the machine, potentially causing a loss of some materials, e.g. half a diamond. 
 

RPED (Rapid Part Exchange Device) [[File: Rped.gif]]
* Print an RPED via the protolathe
* Insert the stock parts into the RPED (you can just click on a pile of stock parts with the RPED in hand and they will be all inserted)
* Screw the panel of the machine open
* Click on the machine to replace the stock parts (you might have to use it several times if there are two better kinds of one stock part)
* Screw the panel back in place

The replacement step occurs instantaneously. 
On the other hand, the RPED can only be constructed at certain Research Levels and can only store stock parts instead of all components. 
In addition to that, it's storage limit is relatively easily reached when trying to upgrade the whole station and using this method resets the machine, like reconstructing does. In the case of the R&D machinery, they need to be reconnected to the console. 
 

Bluespace RPED (Bluespace Rapid Part Exchange Device) [[File: Bluespace_rped.gif]]
* Print a Bluespace RPED via the protolathe
* Insert the stock parts into the Bluespace RPED (you can just click on a pile of stock parts with the Bluespace RPED in hand and they will be all inserted)
* Click on the machine to replace the stock parts (you might have to use it several times if there are two better kinds of one stock part)

The replacement step occurs instantaneously and can be performed remotely. 
However, the Bluespace RPED can only be constructed at certain Research Levels and can only store stock parts instead of all components. 
In addition to that, it's storage limit is much greater than that of the RPED and using this method does not reset the machinery. 

= Technology Disks [[File:Comp_design_or_tech_disk.png]] =

Technology Data Storage Disks are used to store Research Levels on a physical disk, they can be used to:
* Transfer Research Levels between different devices (necessary to transfer Toxins Research from the tachyon-doppler array to the R&D console)
* Complete your [[Scientist#Job_Tasks|Job Task]] (by letting [[Cargo]] ship Tech Disks with basic research off station)

To load Research Levels on the Tech Disks:
* Insert a Tech Disk into the R&D console
* Go under the tab 'Disk Operations'
* Use the 'Load Tech to Disk' button

[[File:Empty Disk Operations.png]]

* Use the 'Copy to Disk' button to download the Research Levels of the respective Research Branch

[[File:Disk Operations download.png]]

A: The Research Branches required for the completion of the Scientists Job Task

Now you have a Tech Disk with research loaded onto it in the R&D console.

[[File:Loaded_Disk_Operations.png]]

In comparison to an empty Tech Disk you can now not only eject it but also:
* Upload it to the Database
* Clear the Disks research to copy new ones onto it

= A Love Letter to R&D =

Research and Development is one of the, if not the most tedious and repetitive task on the entire station. 
Therefore, here are some ideas on how to make your stay in R&D more pleasant for yourself and others:
* Take a more proactive approach to hand items out
* Not only upgrade, but also construct new machines
* Remodel R&D into a more efficient setup
* Set up a [[Guide_to_Teleportation#Quantum_Pads|Quantum Pad]] network
* Construct a back-up [[Telecommunications|Telecommunications system]]
* Experiment with the different items R&D can create
As R&D can construct most of the machinery on the Cyberiad along with everything on the [[Telecoms Satellite]], you are also able to redesign and improve R&D with new capabilities.

= Mad Scientist =

R&D can provide some of the best equipment on the station, allowing you to use the newest cutting edge tools, implants and even weaponry, if you have an emagg to crack the lockboxes, containing them, open. 
Be aware, while it is unsuspicious for you to print jaws of life or advanced grenade casings for yourself, there will be questions if someone happens to witness you slipping a handheld crew monitor into your pocket. 
Furthermore, you can construct nearly any console and machine there is on the station, allowing for a stealthy approach to sabotaging the station and the creation of everything other departments are capable of creating.

@@ Строка 48: / Строка 48: @@
 В качестве исключения вам могут послужить технические записи, купленные у [[Sol Traders|торговцев ТСФ]] и предоставляющие занебесные уровни исследований.
-Базовые исследования (до уровня 5) могут быть достигнуты посредством разбора предметов, созданных в [[Protolathe|протолате]] и [[Circuit Imprinter|принтере плат]], в то время, как для достижения продвинутых исследований (выше уровня 5) вам придется прибегнуть к помощи других отделов (в частности, [[Xenobiology|ксенобиологии]] и [[Robotics|робототехники]]).
+Базовые исследования (до уровня 5) могут быть достигнуты посредством разбора предметов, созданных в [[Protolathe|протолате]] и [[Circuit Imprinter|принтере плат]], в то время, как для достижения продвинутых исследований (выше уровня 5) вам придется прибегнуть к помощи других отделов (в частности, [[Xenobiology|ксенобиологии]] и [[Робототехник|робототехники]]).
 <font size="4">На '''[[Лист разбора для исследований|этой странице]]''' </font>для вас предоставлен некий алгоритм разбора для достижения базовых и продвинутых исследований. Однако, тем не менее, данный алгоритм не является настолько эффективным, и может потребоваться небольшое экспериментирование для собственных наработок. <br>Этот алгоритм относится к процессу непосредственно проведения исследований для повышения уровней.<br>Также вам предоставляется [https://kyep.github.io/paratools/rndtool/RDT.html небольшой инструмент] для симуляции процесса разбора предметов. При нажатии кнопки "filter" будут показываться предметы, разбор которых повысит уровень конкретной отрасли исследований.
 =[[Protolathe|Протолат]] [[File:Protolathe.png]]=

← Предыдущая	Версия 06:16, 25 октября 2020
(нет различий)